How Much Does a Hot Tub REALLY Cost You in 2025 in the United States (A Complete, Honest Analysis)
If you’ve ever made inquiries into buying a hot tub, among the first issues to address is how much the hot tub will actually cost you.
There’s the cost of the hot tub. The cost of whatever it sits on, any electrical work and likely a new swimsuit or two.
Try to figure out how much that costs all together though isn’t always easy.
It's not easy so we went and did the work for you: At Hydropool, the average cost for a hot tub installation is $16,000 U.S. all in – that includes the hot tub, any platform or pad it needs to be on, electrical needs, cover, you name it.
Isn’t it great that we gave you the average range for everything?We have more! In this article, we will explain:
-
The elements that dictate hot tub pricing
-
The types of hot tubs you can buy, from inflatable to rotomolds to acrylic
Hopefully by the end you’ll know what type of hot tub you’re ready to research next!
Factors that Dictate Hot Tub Pricing
The reason why it can be hard to determine the true price of a hot tub is the variety of options available for every hot tub buyer. What we’d like to do here is show you the pros and cons of the hot tub options that exist, to help you figure out what makes sense for you.
The world of hot tubs and spas works in a similar way. There’s a range of hot tubs, and there are pros and cons for each. Your values might include:
- Luxury
- Quality
- Affordability, both to buy and to maintain
- A hot tub that holds four, six, eight, ten people, or whatever number you wish
- A hot tub that has a spa so you can swim in it
- One with attractive lights and jets or both
- One for your entire family to enjoy
- One that will impress your neighbors
- One meant primarily for children to use
- The absolute best there is because, “hey, we only live once.”
All of these expectations are reasonable. Each is available to you in the marketplace.
While choice is great, that kind of variety can make it confusing for a customer trying to figure out how to make the purchase.
So what most people do with Hydropool do is spend around $16,000 U.S. (again, that’s all in, not just for the hot tub). That gets you into a high-quality acrylic hot tub that seats four, which is what most people want today: Acrylic hot tubs make up about 80 percent of the hot tub market.
What’s in the marketplace? There are basically three types of hot tubs: Inflatable, rotationally molded and acrylic.
And while there are other elements, such as size, features, engineering and quality, what your hot tub is actually made of ultimately determines pricing more than any other single factor and the first decision you must make when buying a hot tub.
Why Buy an Inflatable Hot Tub?
These are the ones you see at mainstream stores like Wal-Mart or Lowes or online at Amazon or Wayfair with brand names like Coleman or AquaSpa or Bestway. They are often round, and usually have what looks like a little outboard motor attached to them. You see them, and you wonder: Could I just get one of these? Would that work? Does it really plug in to a normal plug-in? Am I going to get burned on long-term costs? And will it last anyway?
There are pros and cons to this kind of hot tub. Cost is certainly one of the pros: It’s your cheapest path to owning a hot tub. So let’s check that box right there. Inflatable hot tubs are routinely sold for around $1000.
Hydropool doesn’t make or sell these hot tubs. So now is the part where we tell you they are junk, right? Well, we won’t.
There are good reasons why you might want a hot tub like this:
- If you’re just starting out and want to try it, it’s a cost-effective way to get into hot tub ownership.
- If it’s for the kids, and you want them to have a place to splash that’s bigger and better than a plastic pool, then it’s a logical choice.
- If you want one at a property you won’t use that frequently, but want the option to get into a hot tub.
- If your backyard has ongoing landscaping work and you know you need to move the hot tub, then inflatable hot tubs make good sense.
- If you want to “plug and play” – buy a hot tub, inflate it, plug it in to the nearest outlet and jump in, this is the closest you’re going to get (they do actually work on normal plug-ins!). They are as easy and as cost-effective to maintain as any other hot tub, simple to put together and they work.
So why do they cost less? Why haven’t they taken over the entire market?
Pros and Cons of Inflatable Hot Tubs
Inflatable hot tubs are made out of PVC or reinforced vinyl, so they are comparatively inexpensive to make, and those savings are passed on to buyers.
There are tradeoffs from this process though:
- Inflatable hot tubs won’t heat as fast as hot tubs with more powerful motors.
- The hot tubs don’t retain heat as well either, which means their ongoing operating costs can be higher.
- In the Northern U.S., they often become summer hot tubs, as many aren’t ever built to work in the winter or they become comparatively more expensive to operate, because of the consistent heat loss.
- You need to store the hot tub somewhere if not in use.
- While moving a hot tub sounds like a good idea, in practice, most people find they end up in one spot.
- Like owning a tent, if you poke a hole in it, you have a serious problem.
As for features, this is not the inflatable hot tub’s strong suit. An inflatable hot tub usually offers bubbles, but not massage. Most don’t have seating – you sit on the bottom of the hot tub, which is padded, which is fun for accidental toe touching, but not for everyone.
Who is an inflatable for? Call it a classic hot tub experience. There are no bad times in a hot tub, and inflatables deliver on that promise at a reasonable cost. They are also easy to maintain and operate, which keeps costs down and your kids will likely love it. But life with an inflatable is not the same as a permanent hot tub. Which is why most people choose to pay more.
Could Rotationally Molded be Right for You? Wait, What Does Rotational Molded Even Mean?
Rotationally Molded. Let’s just pause there and look at these two words.
Rotationally molded, or “roto mold” if you want to sound a little hip, is best understood as plastic, warmed so it becomes liquid, then poured into a mold. The plastic is then twirled in the air to ensure it covers the entire mold evenly. Then it is cooled and dropped out of the mold and voila! You have a hot tub shell.
Lots of things are made by roto mold. Pylons. Doll heads and bodies. Kayaks. Storage bins. Auto parts. It’s a common manufacturing technique.
A roto mold hot tub is the most affordable option if you want a more permanent hot tub.
How much does it cost to get up and running with a roto mold hot tub? The average is around $4,500 U.S. Like inflatables, they are available at places such as Home Depot or Lowes or Wayfair or Costco or Amazon. You can and probably should put down a pad or deck down but lots of people don’t.
Weight is another benefit. Roto mold hot tubs are comparatively easy to move in and install, as a couple of strong people can lift it off a truck and place it (and later move it if you want, after draining it, of course). They weigh about half of what a comparable acrylic hot tub does.
There will be jets, and the jets will offer massage power, although not as much as hot tubs that cost more money. This is for two reasons:
- Most of these value-oriented hot tubs run on an 110V plug-in, which is the kind you have all over your house. But that plug-in isn’t strong enough to power both heating and powerful jets to run at the same time.
- There’s not enough space on the hot tub itself to hold anything else, because of the size of the mold and the material the hot tub is made of. It’s not thin and it would break or bend if it was made any thinner.
You can often set up your roto molded hot tub to work on a stronger 220-volt hardwired line if you choose, which will increase the power and heat potential, but also increase your operating costs and you will have to get an electrician in.
Roto mold hot tubs aren’t usually as shiny as acrylic versions. They are usually a matte finish and one solid color, often a neutral like grey or brown. The massage function in them is not as good.
What Questions to Ask Before Buying a Hot Tub?
Sizes are limited in roto mold as well. Acrylic is strong enough to be built into pretty much any hot tub you would like – 12-person, 15-person hot tubs are possible. Roto mold caps out at about 6-7. This is due to the size of the machines required to manufacture the hot tub – the molds and manufacturing machines can’t practically be built to make a bigger mold, because the hot tub is all one piece. You would need enormous machinery to make such a hot tub and spin it around in the air, and it’s not cost-effective as a result.
They aren't luxury products as much as functional products. Great for a rental property, with a lower cost of entry, roto mold hot tubs do everything you’d want a hot tub to do. You can add lights, waterfalls, stereos, steps, pillows – basically anything that a hot tub can offer can be had in roto molded tub, provided you want to pay for it.
Who is roto mold for? A roto mold may not look as high-end as an acrylic hot tub. But it can do more things than an inflatable and it can do almost everything an acrylic can. Some of its features might even be better than an acrylic hot tub in terms of cost and durability. So who is it for? A roto mold hot tub is great for someone who values value.
Why Do Most People Buy Acrylic Hot Tubs?
For many, maybe even most, this is what a hot tub is meant to be. It is easy to see why: An acrylic hot tub gleams in the sun. It comes in a wide variety of colors. It typically features synthetic wood paneling. You can get jets to massage any part of your body you might like.
This type of hot tub has the most options, the most variety, and as you might have guessed, comes in at the highest average installed price of around 16,000 U.S.
You can pay more. At the high end of the category, you’re up to $32,000 U.S. You can also pay less for acrylic, but at some point you have to be concerned about quality (honestly, you’re better off with a roto mold product if you get too low of a price point. This is a segment where it can be tougher to go bargain shopping and get a hot tub that will last).
What you’re ultimately buying in an acrylic hot tub is something as beautiful as possible that is also built to be reliable.
In this way, it’s not really like a Honda Civic. It’s a luxury product. Acrylic hot tubs want your envious friends and neighbors to gasp, “Oh, this is nice,” when they see it. They create sighs when people step into it the warm water, and “oooh, that feels goods” when people lie back onto the powerful jets. That all the parts are meant to impress is part of the point of owning one.
Okay, let’s talk about why acrylic hot tubs cost more. We know this sector the best, because Hydropool only makes these types of hot tubs.
There are several reasons for the pricing:
- More jets demand more pumps, which means more money spent on technology and engineering.
- In terms of how they look and function, acrylics have a wider range of options than inflatables or roto molds. The variety means their manufacturing process is more complex.
- The acrylic manufacturing process is more complex, period.
- Acrylic hot tubs are built to require a 220V hardwired source of electricity so jets and lights and heaters can all operate at the same time. That comes with the tradeoff of needing some electrical work done around the house in order to install it and a higher year-round operating cost.
Then there’s how they are built. The many-step process to build is more costly than producing hot tub after hot tub with the same color, in the same mold, with the same range of options, as you would for inflatables or roto mold hot tubs:
- Acrylic hot tubs are made by placing sheets of acrylic material over a mold and then melting the acrylic, while vacuuming the plastic toward the mold, ensuring it comes out perfect. This requires specialized, costly equipment and highly-skilled trained workers.
- The shell is then flipped over and waterproofed with resin and layered with fiberglass for strength, so all parts of the shell are supported in the actual hot tub itself.
- Then the hot tub has to be drilled and plumbed, to fit in the motor that powers the jets, plus the jets themselves.
- Then it must be placed in a separate frame that is either wood or metal, which holds the actual motor, jets, wiring for any lights, or elements like speakers.
- Next insulation must be added to help keep your operating costs down.
- That’s before the bottom is put on, which is usually made out of a heavier plastic that animals won’t want to chew through to get to your delicious wiring.
- Then the outer case must be attached to the frame as well as the bottom.
- Most manufacturers insist that once built, the hot tub must be tested, filled with water and all parts assessed to ensure they operate.
Lots of steps, right? Remember, that’s what you’re paying for. At the top of this article, we pointed out that what your hot tub is made of that determines your pricing more than anything else.
There are other issues with acrylic you will want to know before you buy:
- While acrylic is highly durable, it can chip, and that requires a repairman and possibly a permanent repair mark left in your hot tub once it’s fixed.
- With more options, more things can eventually go wrong over time.
- Acrylic hot tubs are a more permanent fixture. If you decide you absolutely have to move it, it’s going to take a lot of work.
- They are heavy, so you need to make sure they are stable. Depending on the size, you likely need a cement pad put down for it, or a deck, or another strong, consistent flat surface.
- You will likely want to do landscaping around it, or need to adjust your current landscaping for it to fit.
Who is acrylic really for? An acrylic hot tub is for someone who believes a hot tub is about luxury and quality combined into one unit, and who will pay for both elements. You can buy a watch that tells time, and you can buy a watch that people will say, “nice watch.” Both are good watches. An acrylic hot tub is meant to be in the second category.
The Water is Calling: What Next?
You’re up to speed now on how hot tubs are made and how that affects their ultimate cost, and we have covered the range of hot tubs in the marketplace: inflatable, roto mold and acrylic.
Hydropool specializes in acrylic hot tubs, and if that’s where your interests are, please don’t hesitate to contact us at the button below. If you’re not interested in acrylic and want our advice on what roto molds to consider, we are happy to make suggestions for the types of hot tubs we don’t sell as well. Ready to talk to a Hydropool retailer? Find the closest one to you here.